A standard Colorbond gate starts from $900 + GST, supply and install, for a 1m-wide × 1.8m gate with a D-latch. A double gate starts from a higher base than that, since it uses two leaves and more hardware, but I quote that one after seeing your opening rather than off a fixed rate.
I’m Bobby, and every Colorbond gate I install across Perth gets measured and matched to the fence height and colour it sits in, so it’s visually appealing and reads as part of the boundary fence rather than something bolted on afterward.
This guide covers gate cost only. For colour matching, single vs. double sizing, and warranty terms, see the full Colorbond Gates Perth overview.
Colorbond Gate Installation Cost
A standard single Colorbond gate, 1m wide by 1.8m high with a D-latch, costs $900 + GST for colorbond gate supply and install. A keyed lock is extra on top of that.
My installation services for this price include:
- Measuring the opening against your existing fence
- Matching the exact Colorbond colour and profile, not a close approximation
- Supply of genuine Colorbond material, built for Australian conditions and harsh weather conditions without needing repainting
- Standard D-latch hardware
- Installation, fitted flush with the fence line either side, ensuring long-term durability
I don’t sell a colorbond gate kit in Perth or anywhere else, and I don’t sell Colorbond gates as a pick-it-up item. I carefully measure and custom-fit each gate during installation.
This helps ensure the fit and colour match stay consistent with nearby fence panels.
For a generic gate you can install yourself, I do not offer that. The price above is for a gate that matches both sides.
Single vs Double Colorbond Gate Cost
A single gate is the standard choice for most side-access and pedestrian openings, and it’s what the $900 + GST figure above covers.
The cost of colorbond double gates starts from a higher base than a single gate. It uses two leaves instead of one. It also needs extra hardware to hang and latch both sides. This makes it cost more to supply and install.
Double gates work well for driveways, trailer access, equipment access, or other wide openings.
A single gate leaf may be too large to swing easily.
I don’t have a fixed starting price for double gates like I do for standard single gates. Their width varies more, which changes the materials and hardware needed. If you’re after a double gate, the fastest way to get a real number is a quote against your actual opening width.
What Affects Colorbond Gate Cost
Width
A wider opening needs more panel material and stronger hardware to hang well.
Both raise the price above the standard 1m baseline.
Single vs. Double
Covered above, this is usually the biggest single factor in the final number.
Standalone Gate vs. Part of a Fencing Job
A gate quoted alongside a full fencing job can price differently than a standalone gate replacement, since access, measuring, and colour-matching work differently when the fence either side already exists versus when it’s being built at the same time.
Site conditions
Tight side access is common on older Perth blocks, and existing paving or retaining near the gate opening can add labour time, same as it would for a full fencing job.
Hardware upgrades
The base price includes the standard D-latch. I price a keyed lock, or anything beyond standard hardware, as an add-on.
Is This a Fair Quote for Colorbond Gates in Perth?
If you’re comparing a quote against the numbers here, check it covers the same things mine does:
- Confirms an exact colour and profile match to your existing fence, not “similar” or “close enough”
- Specifies genuine Colorbond material, not a substitute panel
- States clearly whether it’s a single or double gate, and the actual width quoted
- Includes installation, not just supply, since a gate that’s dropped off for you to fit yourself isn’t the same job as one measured and installed to sit flush with your fence
A quote that’s missing any of these, especially the exact width or the colour-match confirmation, is harder to compare fairly against a real installed price.
Frequently Asked Questions
How much does a Colorbond gate cost in Perth?
A standard 1m-wide × 1.8m Colorbond gate with a D-latch costs $900 + GST, supply and install. A keyed lock is extra.
How much does a double Colorbond gate cost?
Double gates start from a higher base than a single gate, since they use two leaves and more hardware. I quote double gates against the actual opening width rather than a fixed rate.
Can I buy a Colorbond gate kit and install it myself?
No. I don’t sell Colorbond gates as a standalone item. The job includes measuring and installing every gate. This keeps the colour and profile matched to the fence beside it.
Do you have Colorbond gates for sale without installation?
No, supply and install go together. This keeps the overall fit and finish consistent with the rest of the fence. It avoids a generic gate that is close, but still slightly off.
Do you publish a Colorbond gates price list?
No, not as a fixed list. Single gate pricing starts at $900 + GST. The final price depends on width, single or double, and site conditions. I quote each job based on the actual opening, not a size chart.
What’s included in the cost of a Colorbond gate?
The starting price is $900 + GST. It includes measuring, genuine Colorbond materials matched to your fence, standard D-latch hardware, and installation. I price a keyed lock and any width beyond the standard 1m separately.
Costs above are starting prices for standard conditions, and I quote Colorbond gates across the Perth metro area. Get an exact number for your gate. Request a free quote. or Visit Our Google Business Profile
See Colorbond Gates Perth for colour matching, single vs. double sizing, and warranty details. If you’re pricing a full fence and gate together, see Colorbond Fencing Perth and you can also See Our sliding gates in Perth page.